Linksys SPA9000-NA Installation And Configuration Manual page 75

and so on . Each phone rings for 45 seconds (45;) . After a total of 240 seconds has elapsed, the call
is forwarded to station 100 (240,cfwd=100) .
Multiple Lines with Wildcard Characters
•
400:name=CustomerService,10?,hunt=re;20;2,cfwd=aa|500:name=Sales,
20?,hunt=ra;30;1,cfwd=vm100| 600:name=TechSupport,300,301,302,
hunt=ne;45;3,cfwd=100|
Three hunt groups are created . A call to extension 400 rings stations 100 to 109 in "from the
beginning order . " A call to extension 500 rings stations 200 to 209 in random order . A call to
extension 600 rings the listed stations in "next station" order .
Creating a Hunt Group to Ring Individual Stations
1 . Start Internet Explorer, and then enter the IP address of the SPA9000 . Click
then click Advanced .
2 . Click Voice tab > SIP .
3 . Scroll down to the PBX Parameters section .
4 . In the Hunt Groups field, enter the hunt group rule . See
Hunt Group Rule" on page 72
page 73 .
Submit All Changes . The phones reboot .
5 . Click
6 . To verify the settings, place a call to the extension that you created . Verify that member stations
ring in the desired order, with the desired ring interval, maximum cycles, and call forwarding .
Linksys Voice System Installation and Configuration Guide
Configuring Special Features
"Syntax for a "Ring Individual Stations"
and "Examples of "Ring Individual Stations" Hunt Group Rules" on
Configuring Hunt Groups
Admin Login and
74