Ip Handset The Linksys SPA-942 is a functionally powerful and easy to use business phone featuring a high resolution graphical display, a full duplex speaker-phone, a headset port and efficient call handling functions such as on-hold, mute, call logs, caller ID and personal address book.
1. assembling your Ip handset and connecting to the network 1. Find the end of the coiled phone handset cord that has the longer straightened end. Plug that end into the back of the phone base (phone symbol). 2. Plug in short straightened end of the handset cord into the jack at the bottom of the handset (not shown).
Press the headset button and the green light behind the button will illuminate. For information on the exact models of headsets that are supported, see the IP phone information on http://www.linksys.com. switching between Any of the audio devices can be used during a call. Only one device at a time can be used.
4. using the service Making telephone note: You may need to dial an access code to reach an outside line. Talk to your Phone calls Administrator about your company’s specific dialling rules/plan. You can place a call by: • Lifting the handset and dialling immediately; or •...
5. call Features • Mute the handset, headset or speakerphone by pressing the Mute button. This prevents Muting a call the person on the active call from hearing what you or someone else in the room is saying. • To cancel the Mute function, press the Mute button again. •...
7. setup directory time/date 13. restart speed dial Voice Mail 14. Factory reset call History network 15. custom reset ring tone 10 . product Info 16. set password preferences 11. status 17. Lcd contrast call Forward 12. reboot 18. Language LaBeL descrIptIOn <...
Page 7
1. dIrectOry Adding a New Entry to Your Personal Directory: • To view your phone’s directory options, press the setup button, then the soft button under select. • Using the navigation button, move up or down to highlight new entry. •...
Page 8
5. preFerences You can set six different preferences for your phone. • To select a preference, press the setup button, then 5. • Use the navigation button to highlight the preference to change, then press the soft button under edit. 1.
Page 9
10. prOduct InFO This setting displays the product name, serial number, software version, hardware version, MAC address and Client Certificate. 11. status This setting displays the status of the phone, extension and line buttons. 12. reBOOt This setting is to configure and troubleshoot the network. you should not change this setting unless directed to by your administrator as this can negatively affect your phone’s function.