Parameters For Configuration Method And Encryption; Usetftp - Cisco ATA186-I2 Administrator's Manual

Parameters for Configuration Method and Encryption

To clear a password, change the value to 0.
You cannot recover a forgotten password unless you reset the entire configuration of the Cisco ATA (see
the
When UIPassword contains letters, you cannot enter the password from the telephone keypad.
Note
Value Type
Alphanumeric string
Range
Maximum nine characters
Default
0
Voice Configuration Menu Access Code
7387277
Related Parameter
OpFlags, page
Parameters for Configuration Method and Encryption
This section describes parameters for instructing the Cisco ATA about how to locate its TFTP server and
how to encrypt its configuration file:
•
•
•
•
•

UseTFTP

Settings
1—Use the TFTP server for Cisco ATA configuration.
0—Do not use the TFTP server for Cisco ATA configuration.
Value Type
Boolean
Range
0 or 1
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
5-4
"Resetting the Cisco ATA to Factory Default Values" section on page
5-34—Bit 7
UseTFTP, page 5-4
TftpURL, page 5-5
CfgInterval, page 5-6
EncryptKey, page 5-6
EncryptKeyEx, page 5-7
Chapter 5 Parameters and Defaults
3-23).
OL-4804-01