Table of Contents
Advertisement
Chapter 5
Parameters and Defaults
Default
0.0.0.0
Voice Configuration Menu Access Code
141
Related Parameters
•
•
AltNTPIP
Description
This parameter is the alternate NTP IP address, if you want redundancy. You can set this parameter to 0
or point to the same NTPIP if only one NTP server exists.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
142
Related Parameters
•
•
DNS1IP
Description
This parameter is for setting the primary domain name server (DNS) IP address, if the DHCP server does
not provide one. If DHCP provides DNS1IP (and if it is non-zero), this parameter overwrites the
DHCP-supplied value. You cannot specify a port parameter. The Cisco ATA uses the default DNS port
only.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
916
OL-4804-01
AltNTPIP, page 5-11
TimeZone, page 5-36
NTPIP, page 5-10
TimeZone, page 5-36
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
Network Configuration Parameters
5-11
Advertisement
Table of Contents
