Table of Contents
Advertisement
Chapter 5
Parameters and Defaults
Table 5-3
PaidFeatures Parameter Bit Definitions (continued)
Bit Number
Definition
6 and 22
Not used for H.323.
7 and 23
Not used for H.323.
8 and 24
Caller ID. This service enables the Cisco ATA 186 to generate a Caller ID signal to drive a Caller ID display
device attached to the FXS line.
9 and 25
Not used for H.323.
10 and 26
Not used for H.323.
11 and 27
Call Waiting Caller ID.
12-14 and
Reserved.
28-30
15 and 31
Fax mode. This service allows the user to set the Cisco ATA to Fax mode on a per-call basis. For Fax mode,
use the following settings:
G711 codec only
•
No silence suppression
•
No FAX tone detection
•
CallCmd
Description
Command table that controls call commands such as turning on/off caller ID.
For detailed information on the CallCmd parameter, see
Value Type
Alphanumeric string
Range
Maximum of 248 characters
Default
U.S. Call Command Default
Af;AH;BS;NA;CS;NA;Df;EB;Ff;EP;Kf;EFh;HH;Jf;AFh;HQ;I*67;gA*82;fA#90v#;OI;H#72v#;bA#74
v#;cA#75v#;dA#73;eA*67;gA*82;fA*70;iA*69;DA*99;xA;Uh;GQ;
Voice Configuration Menu Access Code
930
Related Parameters
•
•
•
•
OL-4804-01
CallFeatures, page 5-27
PaidFeatures, page 5-28
CallerIdMethod, page 5-38
SigTimer, page 5-31
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
Operational Parameters
Chapter 6, "Call Commands."
5-29
Advertisement
Table of Contents
