Chapter 5
Setting Up and Managing Shared Profile Components
Adding a Shared Network Access Restriction
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
78-14696-01, Version 3.1
This section contains the following procedures:
Adding a Shared Network Access Restriction, page 5-9
•
Editing a Shared Network Access Restriction, page 5-11
•
•
Deleting a Shared Network Access Restriction, page 5-13
To add a shared NAR, follow these steps:
In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page appears.
Click Network Access Restrictions.
Click Add.
Result: The Network Access Restriction page appears.
In the Name box, type a name for the new shared NAR.
Note
The name can contain up to 32 characters. Leading and trailing spaces are
not allowed. Names cannot contain the following four characters:
[ ] , /
In the Description box, type a description of the new shared NAR.
To permit or deny access based on IP addressing, follow these steps:
Note
This step is performed for IP-based restrictions where an IP connection
exists. For other restriction types, see
Restrictions, page
a.
Select the Define IP-based access descriptions check box.
To specify whether you are listing addresses that are permitted or denied,
b.
from the Table Defines list, select the applicable value.
About Network Access
5-6.
User Guide for Cisco Secure ACS for Windows Server
Network Access Restrictions
5-9