Listing Custom Radius Vendors - Cisco 2509 - Router - EN User Manual

Appendix D Cisco Secure ACS Command-Line Database Utility
Step 2
Step 3
Step 4

Listing Custom RADIUS Vendors

Step 1
78-14696-01, Version 3.1
Type:
slot-number
CSUtil.exe -delUDV
where slot-number is the slot containing the RADIUS vendor that you want to
delete. Press Enter.
Note For more information about determining what RADIUS vendor a
particular slot contains, see
page D-31.
Result: CSUtil.exe displays a confirmation prompt.
To confirm that you want to halt all Cisco Secure ACS services while deleting the
custom RADIUS vendor and VSAs, type Y and press Enter.
Result: CSUtil.exe displays a second confirmation prompt.
To confirm that you want to delete the RADIUS vendor, type Y and press Enter.
Result: CSUtil.exe halts Cisco Secure ACS services, deletes the specified
RADIUS vendor from Cisco Secure ACS. This process may take a few minutes.
After it is complete, CSUtil.exe restarts Cisco Secure ACS services.
You can use the -listUDV option to determine what custom RADIUS vendors are
defined in Cisco Secure ACS. This option also enables you to determine which of
the ten possible custom RADIUS vendor slots are in use and which RADIUS
vendor occupies each used slot.
To list all custom RADIUS vendors defined in Cisco Secure ACS, follow these
steps:
On the Cisco Secure ACS server, open an MS DOS command prompt and change
directories to the directory containing CSUtil.exe. For more information about the
location of CSUtil.exe, see
User-Defined RADIUS Vendors and VSA Sets
Listing Custom RADIUS Vendors,
Location of CSUtil.exe and Related Files, page
User Guide for Cisco Secure ACS for Windows Server
D-2.
D-31