Cisco 2509 - Router - EN User Manual page 98

Protocol Configuration Options for RADIUS
Table 3-1 RADIUS Listings in Interface (continued)
Configure
this Type
of AAA
Client... ...and the Interface Configuration Page Lists These Types of Settings
RADIUS RADIUS
(IETF) (Cisco
Aironet)
RADIUS Yes No
(Cisco
VPN
5000)
RADIUS Yes No
(Juniper)
RADIUS Yes No
(Nortel)
RADIUS Yes No
(iPass)
Tip
User Guide for Cisco Secure ACS for Windows Server
3-12
RADIUS RADIUS
(BBSM) (Cisco
IOS/PIX)
No No
No No
No No
No No
You must have your network devices configured before you can select, on the
Interface Configuration page, a type of setting for further configuration.
From the Interface Configuration page, when you click to select a type of
RADIUS setting to configure, the HTML interface displays the corresponding list
of available RADIUS attributes and associated check boxes. If you have selected
the Per-user TACACS+/RADIUS Attributes check box in Interface Configuration:
Advanced Options, a User check box appears alongside the Group check box for
each attribute. Otherwise, only the Group check box for each attribute appears. By
selecting check boxes in a list of attributes, you determine whether the
corresponding (IETF) RADIUS attribute or vendor-specific attribute (VSA) is
configurable from the User Setup and Group Setup sections.
Chapter 3 Setting Up the Cisco Secure ACS HTML Interface
RADIUS RADIUS RADIUS
(Micro- (Ascend) (Cisco
soft) VPN
3000)
No No No
No No No
No No No
No No No
RADIUS RADIUS RADIUS
(Cisco (Juniper) (Nortel)
VPN
5000)
Yes No No
No Yes No
No No Yes
No No No
78-14696-01, Version 3.1