Setting Tacacs+ Enable Password Options For A User - Cisco 2509 - Router - EN User Manual

Chapter 7 Setting Up and Managing User Accounts
Step 5

Setting TACACS+ Enable Password Options for a User

Step 1
78-14696-01, Version 3.1
Click Add Association.
c.
Result: An entry appears in the table, associating the device group with a
particular privilege level.
Repeat Step a through Step c for each device group you want to associate to
d.
this user.
To delete an entry, select the entry and then click Remove Associate.
Tip
Do one of the following:
• If you are finished configuring the user account options, click Submit to
record the options.
• To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
When setting the TACACS+ Enable Password Options for a user, you have three
options to chose from:
• Use CiscoSecure PAP password
Use external database password
•
Use separate password
•
To set the options for the TACACS+ Enable password, follow these steps:
Perform Step 1 through Step 3 of
Result: The User Setup Edit page opens. The username being added or edited is
at the top of the page.
Advanced User Authentication Settings
Adding a Basic User Account, page
User Guide for Cisco Secure ACS for Windows Server
7-5.
7-35