Advanced User Authentication Settings
Step 1
Step 2
Step 3
Step 4
Advanced User Authentication Settings
TACACS+ Settings (User)
User Guide for Cisco Secure ACS for Windows Server
7-22
To assign a downloadable PIX ACL to a user account, follow these steps:
Perform Step 1 through Step 3 of
Result: The User Setup Edit page opens. The username being added and edited is
at the top of the page.
Under the Downloadable ACLs section, click the Assign PIX ACL: check box.
Select a PIX ACL from the list.
Do one of the following:
If you are finished configuring the user account options, click Submit to
•
record the options.
To continue to specify the user account options, perform other procedures in
•
this chapter, as applicable.
This section presents the activities you perform to configure user-level
TACACS+ and RADIUS enable parameters.
This section contains the following subsections:
•
TACACS+ Settings (User), page 7-22
Advanced TACACS+ Settings (User), page 7-33
•
RADIUS Attributes, page 7-37
•
The TACACS+ Settings section permits you to enable and configure the
service/protocol parameters to be applied for the authorization of a user. This
section contains the following procedures:
Configuring TACACS+ Settings for a User, page 7-23
•
Configuring a Shell Command Authorization Set for a User, page 7-25
•
Configuring a PIX Command Authorization Set for a User, page 7-28
•
Chapter 7
Setting Up and Managing User Accounts
Adding a Basic User Account, page
7-5.
78-14696-01, Version 3.1