Setting Protocol Configuration Options For Ietf Radius Attributes - Cisco 2509 - Router - EN User Manual

Chapter 3 Setting Up the Cisco Secure ACS HTML Interface
Setting Protocol Configuration Options for IETF RADIUS
Attributes
Note
Note
Step 1
Step 2
Step 3
78-14696-01, Version 3.1
appear as configurable options on the User Setup or Group Setup page. For
information about creating user-defined RADIUS VSAs, see
Vendors and VSAs, page
This procedure enables you to hide or display any of the standard IETF RADIUS
attributes for configuration from other portions of the Cisco Secure ACS HTML
interface.
If the Per-user TACACS+/RADIUS Attributes check box in Interface
Configuration: Advanced Options is selected, a User check box appears alongside
the Group check box for each attribute.
Each selected IETF RADIUS attribute must be supported by all your network
devices using RADIUS.
To set protocol configuration options for IETF RADIUS attributes, follow these
steps:
Click Interface Configuration, and then click RADIUS (IETF).
Result: The RADIUS (IETF) page appears.
For each IETF RADIUS attribute that you want to appear as a configurable option
on the User Setup or Group Setup page, select the corresponding check box.
Each attribute selected must be supported by your RADIUS network
Note
devices.
To specify how many values to display for tagged attributes on the User Setup and
Group Setup pages, select the Tags to Display Per Attribute option, and then
select a value from the corresponding list. Examples of tagged attributes are
and
[064] Tunnel-Type
Protocol Configuration Options for RADIUS
8-33.
[069] Tunnel-Password
User Guide for Cisco Secure ACS for Windows Server
Custom RADIUS
.
3-15