Action Codes For Creating And Modifying User Accounts - Cisco 2509 - Router - EN User Manual

Appendix F RDBMS Synchronization Import Definitions

Action Codes for Creating and Modifying User Accounts

Note
Table F-3 User Creation and Modification Action Codes
Action
Code Name
100 ADD_USER
101 DELETE_USER
102 SET_PAP_PASS
103 SET_CHAP_PASS
104 SET_OUTBOUND_
CHAP_PASS
78-14696-01, Version 3.1
Table F-3 lists the action codes for creating, modifying, and deleting user
accounts.
Before you can modify a user account, such as assigning a password, you must
create the user account, either in the HTML interface or by using the ADD_USER
action (action code: 100).
Transactions using these codes affect the configuration displayed in the User
Setup section of the HTML interface. For more information about the User Setup
section, see Chapter 7, "Setting Up and Managing User Accounts."
Required
UN|GN, V1 Create a user (32 characters maximum). V1 is used as the
UN
UN, V1
UN, V1
UN, V1
Description
initial password. Optionally, the user can also be assigned
to a group.
Remove a user.
Set the PAP password for a user (64 ASCII characters
maximum). CHAP/ARAP will also default to this.
Set the CHAP/ARAP password for a user (64 characters
maximum).
Sets the CHAP/ARAP password for a user (32 characters
maximum).
User Guide for Cisco Secure ACS for Windows Server
Action Codes
F-7