Network Requirements - Cisco 2509 - Router - EN User Manual

Basic Deployment Requirements for Cisco Secure ACS

Network Requirements

User Guide for Cisco Secure ACS for Windows Server
2-4
For the latest information about tested browsers and other third-party
applications, see the Release Notes. The latest version of the Release Notes are
posted on Cisco.com at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/
index.htm.
Your network should meet the following requirements before you begin
deploying Cisco Secure ACS.
For full TACACS+ and RADIUS support on Cisco IOS devices, AAA clients
•
must run Cisco IOS Release 11.2 or later.
Non-Cisco IOS AAA clients must be configured with TACACS+ and/or
•
RADIUS.
Dial-in, VPN, or wireless clients must be able to connect to the applicable
•
AAA clients.
The computer running Cisco Secure ACS must be able to ping all AAA
•
clients.
Gateway devices between AAA clients and Cisco Secure ACS must permit
•
communication over the ports needed to support the applicable AAA protocol
(RADIUS or TACACS+). For information about ports used by AAA
protocols, see AAA Protocols—TACACS+ and RADIUS, page
Make sure a compatible web browser is installed on the computer that runs
•
Cisco Secure ACS. For more information, see
Requirements, page
• To have Cisco Secure ACS use the Grant Dial-in Permission to User feature
in Windows when authorizing network users, enable this option for the
applicable user accounts in the relevant Active Directory or Windows
Security Accounts Manager (SAM) database.
Chapter 2
2-3.
Deploying Cisco Secure ACS
1-6.
Third-Party Software
78-14696-01, Version 3.1