Accessing The Html Interface; Logging Off The Html Interface - Cisco 2509 - Router - EN User Manual

Chapter 1 Overview of Cisco Secure ACS

Accessing the HTML Interface

Step 1
Step 2
Step 3

Logging Off the HTML Interface

78-14696-01, Version 3.1
Remote administrative sessions always require that you log in using a valid
administrator name and password, as configured in the Administration Control
section. If the Allow automatic local login check box is cleared on the Sessions
Policy Setup page in the Administration Control section, Cisco Secure ACS
requires a valid administrator name and password for administrative sessions
accessed from a browser on the Cisco Secure ACS server.
To access the HTML interface, follow these steps:
Open a web browser. For a list of supported web browsers, see the Release Notes
for the version of Cisco Secure ACS you are accessing. The latest revision to the
Release Notes is posted on Cisco.com (http://www.cisco.com).
In the Address or Location bar in the web browser, type the applicable URL. For
a list of possible URLs, see
page 1-26.
If the Cisco Secure ACS for Windows 2000/NT Login page appears, follow these
steps:
a. In the Username box, type a valid Cisco Secure ACS administrator name.
In the Password box, type the password for the administrator name you
b.
specified.
c. Click Login.
Result: The Cisco Secure ACS for Windows 2000 initial page appears.
When you are finished using the HTML interface, we recommend that you log off.
While Cisco Secure ACS can timeout unused administrative sessions, logging off
prevents unauthorized access by someone using the browser after you or by
unauthorized persons using the HTTP port left open to support the administrative
session.
To log off the Cisco Secure ACS HTML interface, click the Logoff button.
Uniform Resource Locator for the HTML Interface,
User Guide for Cisco Secure ACS for Windows Server
Cisco Secure ACS HTML Interface
1-29