Cisco 2509 - Router - EN User Manual page 170

Common User Group Settings
c.
d.
Tip
Tip
e.
User Guide for Cisco Secure ACS for Windows Server
6-10
From the AAA Client list, select either All AAA Clients or the name of the
NDG or the name of the particular AAA client to which to permit or deny
access.
Complete the following boxes:
You must type an entry in each box. You can use the wildcard asterisk
Note
(*) for all or part of a value. The format you use must match the
format of the string you receive from your AAA client. You can
determine this format from your RADIUS Accounting Log.
• PORT—Type the number of the port to which to permit or deny access.
You can use the wildcard asterisk (*) to permit or deny access to all ports.
• CLI—Type the CLI number to which to permit or deny access. You can
use the wildcard asterisk (*) to permit or deny access based on part of the
number or all numbers.
This is also the selection to use if you want to restrict access based on
other values, such as a Cisco Aironet client MAC address. For more
information, see About Network Access Restrictions, page
DNIS—Type the DNIS number to restrict access based on the number
•
into which the user will be dialing. You can use the wildcard asterisk (*)
to permit or deny access based on part of the number or all numbers.
This is also the selection to use if you want to restrict access based on
other values, such as a Cisco Aironet AP MAC address. For more
information, see About Network Access Restrictions, page
Click Enter.
Result: The information, specifying the AAA client, port, CLI, and DNIS
appears in the list.
Chapter 6 Setting Up and Managing User Groups
78-14696-01, Version 3.1
5-6.
5-6.