Table of Contents
Advertisement
Maximum RtQc
Alt correction
ARINC
Select limits displays the current setting. To change the select limits setting:
1)
Tap the select limits panel.
2)
Tap the required select limits radio button. The select limits radio button panel closes and the
select limits panel shows the new selection.
Default limits
Allows the user to select the limits that the unit defaults to following a power down of the unit. The
supervisor pin is required in order to change the default limits.
Edit limits
When selected, this function requires you to enter a PIN code. An existing limit set can be edited using
this function. To edit limits:
1)
Tap Edit limits, a numbered keypad is displayed.
2)
Enter your PIN number and tap the "tick" icon. The Edit limits panel opens. Tapping the "cross"
icon closes the numbered keypad without making any changes.
3)
On the Edit limits panel, tap the panel (User 1 to 5) for the limits to be edited. The current limits
are displayed.
4)
Tap a limit, a numbered keypad opens allowing you to edit the current limit.
5)
Edit the limit and tap the "tick" icon. The parameter is changed and the keypad closes. Tapping
the "cross" icon closes the numbered keypad without making any changes.
Create new limits
When selected, this function requires you to enter a PIN code. A new limits set can be created
following the deletion of an existing limits set or by overwriting existing limits. To create new limits:
1)
Tap Create new limits, a numbered keypad is displayed.
2)
Enter your PIN number and tap the "tick" icon. The Create new limits panel opens. Tapping the
"cross" icon closes the numbered keypad without making any changes.
3)
On the Create new limits panel, tap the panel for the custom limits name to be created or edited
(User 1 to 5). The Custom limits name panel and keyboard opens.
4)
Tap the "tick" icon. The message Name Already Exists. Do you want to Overwrite? is
displayed.
5)
Tap Yes. The previously selected User 1 to 5 limits panel opens. Tapping No returns you to the
Custom limits name panel.
6)
Tapping the desired item in the list opens a numbered keypad.
7)
Input the new numbers and tap the "tick" icon. The numbered keypad closes and the new param-
eter is shown for the selected item. Tapping the "cross" icon closes the numbered keypad
without making any changes.
109.85 mbar/min
±100.0 feet
Off
S
ETTINGS
78
Advertisement
Table of Contents
