Table of Contents
Advertisement
To set the WAIT period:
1)
On the Rate Timer panel, tap WAIT (1) to highlight it, the Set Time panel opens.
2)
On the Set Time panel, select the required "hours", "minutes" and "seconds" (2).
3)
Tap the "Tick" icon (3), the Set Time panel closes and the new time is displayed in the Rate Timer
panel.
4)
Tapping the "Cross" icon (4), cancels the action and closes the Set Time panel.
To set the "TEST" period:
1)
On the "Rate Timer" panel, tap "TEST" (5) to highlight it, the "Set Time" panel opens.
2)
On the Set Time panel, select the required "hours", "minutes" and "seconds".
3)
Tap the "Tick" icon, the Set Time panel closes and the new time is displayed in the Rate Timer
panel.
4)
Tapping the "Cross" icon, cancels the action and closes the Set Time panel.
Figure 3-13: Set time panel
R
T
ATE
IMER MODE
68
Advertisement
Table of Contents
