GE ADTS 542 Instruction Manual page 142

Select NEW SCAN FOR DEVICES. The message Please wait scanning for devices is
5)
displayed.
: Must be done within five minutes of power-up on units using DK0467 software.
NOTE
6) A list of available devices is displayed showing the software version and serial numbers of the
devices.
7) If necessary, scroll down the list and select (highlight) the desired base unit serial number from the
list.
8) Touch the "tick" icon to confirm the selection and close the list of devices. The base unit and ADTS
Touch are now "Paired".
9) Touching the "cross" icon closes the list of devices without making any changes.
If the Bluetooth® link drops and does not automatically reconnect, then repeat the procedure rather
than pairing the devices from within the cockpit.
B ®
LUETOOTH
140