Table of Contents
Advertisement
GLOSSARY
Adjust
To bring to a more satisfactory state; to manipulate controls, levers,
linkages, etc. to return equipment from an out-of-tolerance condition to
an in-tolerance condition.
Align
To bring into line; to line up; to bring into precise adjustment, correct
relative position or coincidence.
Assemble
To fit and secure together the several parts of; to make or form by
combining parts.
Calibrate
To determine accuracy, deviation or variation by special measurement
or by comparison with a standard.
Check
Make a comparison of a measure of time, pressure, temperature,
resistance, dimension or other quality with a known figure for that
measurement.
Disconnect
To detach the connection between; to separate keyed or matched
equipment parts.
Dismantle
To take apart to the level of the next smaller unit or down to all
removable parts.
Examine
To perform a critical visual observation or check for specific conditions;
to test the condition of.
Fit
Correctly attach one item to another.
Inspect
Review the work carried out by Specialists to ensure it has been
performed satisfactorily.
Install
To perform operations necessary to properly fit an equipment unit into
the next larger assembly or system.
Maintain
To hold or keep in any particular state or condition especially in a state
of efficiency or validity.
Operate
Make sure that an item or system functions correctly as far as possible
without the use of test equipment or reference to measurement.
Readjust
To adjust again; to move back to a specified condition; to bring back to
an in-tolerance condition.
Advertisement
Table of Contents
