GE ADTS 542 Instruction Manual page 5

Compliance Statements
Note: You can view the compliance information stored on the ADTS Touch as follows:
From the ADTS Touch Dashboard, select:
1. Tools
2. Bluetooth®
3. Select certification.
FCC Warning Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF expo-
sure compliance. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
USA
ADTS542F/ADTS552F/ADTS553F/ADTS554F
This device has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
This device is only authorized for use in a mobile application. At least 20 cm of separation dis-
tance between the ADTS5XXF device and the user's body must be maintained at all times.
• ADTS542F/ADTS552F/ADTS553F/ADTS554F: Contains Transmitter Module FCC ID:
QOQWT41.
• (For DK0429 variants only) ADTS552F: FCC ID: 2AAVWADTS552F-01