Table of Contents
Advertisement
Power Supply Jack
RS232 Serial Interface
LON 1
LON 2
The following features are located on the top of the device (from left to right):
The power supply unit and attached cable (included in the shipment) can be
inserted into the power supply jack to provide electrical power from any standard
EURO power supply socket with a primary voltage of from 100 Vac to 240 Vac.
NOTE: When connected to an external AC power supply, XILON's internal
batteries are automatically recharged, by default.
This RS232 serial interface (main feature: Dsub9 socket) features nine pins having
the following functions:
1.
Pin 1 is DCD (Data Carrier Detect) and is internally connected with pin 4 and
pin 6.
2.
Pin 2 is TxD (Transmitted Data).
3.
Pin 3 is RxD (Received Data).
4.
Pin 4 is DTR (Data Terminal Ready) and is internally connected with pin 1
and pin 6.
5.
Pin 5 is the ground wire.
6.
Pin 6 is DSR (Data Set Ready) and is internally connected with pin 1 and pin
4.
7.
Pin 7 is the RTS (Request to Send) and is internally connected with pin 8.
8.
Pin 8 is the CTS (Clear to Send) and is internally connected with pin 7.
9.
Pin 9 is not used.
This socket is for connecting, via the 1.5-meter-long L
the attached RJ11 connector, XILON to the L
supplying it with power (12...24 Vdc or 24 Vac). The socket hence consists of the
following six pins:
1.
Pin 1 is for connection to LON network A (the pink L
2.
Pin 2 is for connection to LON network B (the gray L
3.
Pin 3 is not connected (i.e. not used).
4.
Pin 4 is not connected (i.e. not used).
5.
Pin 5 is for connection to the ground (the brown wire).
6.
Pin 6 is for connection to the 0.5 amp, 24 Vac/dc power supply (the white
wire).
XILON is connected to the L
2) L
W
wires. Pins 5 and 6 can be used to supply XILON with 24 Vac/dc
ON
ORKS
power. This power supply is alternative to the external AC power supply via the
EURO plug.
NOTE: The battery pack will be recharged only when dc power is supplied.
This socket is for connecting, using a L
supply, XILON to the L
W
ON
its built-in battery pack or via the power supply jack. This socket hence consists of
the following three pins:
1.
Pin 1 is for LON network A (the pink L
2.
Pin 2 is for the ground (the brown wire).
3.
Pin 3 is for LON network B (the gray L
NOTE: The download cable (not included in shipment) for upgrading XILON
applications and upgrading BIOS via the RS232 must be a standard one-
to-one cable.
9
XILON HANDHELD TOOL - USER GUIDE
Features Located on Top of Device
W
ON
ORKS
W
network via the pink (pin 1) and the gray (pin
ON
ORKS
W
-compatible cable which you must
ON
ORKS
network when XILON is being powered by either
ORKS
W
wire).
ON
ORKS
W
ON
ORKS
W
network cable and
ON
ORKS
network and, if desired,
W
wire).
ON
ORKS
W
wire).
ON
ORKS
wire).
EN2B-0214GE51 R0503
Advertisement
Table of Contents
