Table of Contents
Advertisement
XILON HANDHELD TOOL - USER GUIDE
<SHIFT> + <F2>
<SHIFT> + <F3>
<SHIFT> + <F4>
<SHIFT> + <F5>
EN2B-0214GE51 R0503
Pressing the <ESC> key always results in an escape.
NOTE: Some changes must always be executed using special buttons (e.g.
<SET>). Otherwise, the edited value of the dialog might become lost.
The so-called "hot keys" are ten special function keys (<F1> ... <F10>) arranged in
two rows at the top of the keypad. They are a fast means of initiating special XILON
operations at almost any time, i.e. regardless of the contents of the current screen /
menu and regardless of the position of the cursor in it.
<F1>
The <F1> hot key is used to provide help screens dependent on the selected item
of the current menu.
The <F2> ... <F10> hot keys and their combination with the <SHIFT> key can be
used to start assigned functions of the application. The hot keys cannot be used in
a help mode, if a message is displayed, or if the database line is selected. The
individual functions of the <F2> ... <F9> hot keys and their combination with the
<SHIFT> key are summarized below.
<F2>
Pressing the <F2> hot key initiates the "Service Pin" function.
<F3>
Pressing the <F3> hot key initiates the "Search" function.
<F4>
Pressing the <F4> hot key initiates the "Node information" function.
<F5>
Pressing the <F5> hot key initiates the "Domain table" function.
<F6>
Pressing the <F6> hot key initiates the "Address table" function.
<F7>
Pressing the <F7> hot key initiates the "NV table" function.
<F8>
Pressing the <F8> hot key initiates the "NV monitors 1" function.
<F9>
Pressing the <F9> hot key initiates the "NV monitors 2" function.
<F10>
The <F10> hot key is available in most menus. The assigned function is either to
go to the toolbar menu or to open the menu for device set-up. The actual function
available in any given case is displayed in the line above the status line.
All these functions are represented by icons in the toolbar menu and tree view
menu. A short description is displayed there for the selected item. The second line
of icons represents the combinations of a hot key with the <SHIFT> key (see
).
below
NOTE: <SHIFT> + hot key <F1>...<F9> is permitted only in the toolbar or tree
view menus (but not in dialogs).
NOTE: The descriptions of the results of the following combinations of <SHIFT>
and hot keys are valid for XILON Honeywell version 1.00.93.
Pressing <SHIFT> and then the <F1> hot key initiates the "I/O" function.
Pressing <SHIFT> and then the <F2> hot key initiates the "All Automatic" function.
Pressing <SHIFT> and then the <F3> hot key initiates the "Error Status" function.
Pressing <SHIFT> and then the <F4> hot key initiates the "Send Wink" function,
i.e. the node is instructed to perform a so-called "wink." In the case of an Excel
Smart I/O, for instance, the module's L
consequence.
Hot Keys Used in Conjunction with <SHIFT>
W
ON
ORKS
12
Hot Keys (<F1> ... <F10>)
Hot Keys Used Alone
service LED would blink as a
Advertisement
Table of Contents
