Table of Contents
Advertisement
XILON HANDHELD TOOL - USER GUIDE
<Power OFF>
<Service Pin>
<Setup General...>
<Setup Address...>
<SPA interface>
EN2B-0214GE51 R0503
NOTE: If XILON is running on battery power, you can set up an automatic, time-
controlled shutdown.
After selecting "XILON Set-Up", you will have a choice of either "Device" or
"Application."
< Power OFF
<
Service Pin
< Setup General..>
< Setup Address..>
< SPA interface
NID
:0005127924300
SecCode :Qwzu
F1=Help F10=Menu
The user can go to the "device" screen by pressing the <F10> hot key when the
toolbar menu is active. To go to the toolbar menu from other menus, you can use
the <ESC> key to go up one level every time the key is pressed. If the status line
displays "F10=Menu", the <F10> hot key can be used to go immediately to the
toolbar menu.
The "device" screen can be selected from the main tree view menu, too. Use
<ESC> from lower levels to go up one level every time it is pressed.
The "device" screen provides the following items:
Select this item and press <ENTER> to switch XILON OFF.
XILON sends a service pin message if the <ENTER> key is pressed while this item
is focused.
Select this item and press <ENTER> to open the dialog for general settings
described in 'General Settings'.
Select this item and press <ENTER> to open the dialog for L
settings.
Select this item and press <ENTER> to use XILON as a PC LonTalk adapter (see
also Sysmik literature).
After focusing this item and pressing <ENTER>, XILON will periodically perform
automatic updates of the node's states.
Properties
LON update :-
F1=Help F10=Menu
20
>
>
>
Fig. 9. XILON setup
Fig. 10. LON update
XILON Set-Up
Device
W
-related
ON
ORKS
Application
Advertisement
Table of Contents
