Honeywell EXCEL5000 OPEN XILON User Manual page 28

XILON HANDHELD TOOL - USER GUIDE
EN2B-0214GE51 R0503
Alarms:
Alarm information is presented in a fashion similar to that in which the parameters
are presented. This information is read-only information and thus cannot be
changed.
A: C1 LP Compressor 1 low pressure alarm
Compressor 2 low pressure alarm
A: C2 LP
A: C1 HP Compressor 1 high pressure alarm
Compressor 2 high pressure alarm
A: C2 HP
A: C1 Sns Condenser 1 sensor alarm
Condenser 2 sensor alarm
A: C2 Sns
A: EvapFan Evaporator fan alarm
Space or duct temperature sensor alarm
A: TempSns
A: Setp Setpoint failure
Fan speed button failure
A: FSpBtn
A: Ext External alarm
Status/Diagnostics:
Status information is presented in a fashion similar to that in which the parameters
are presented. This information is read-only information and thus cannot be
changed.
The following status information may occur in the list:
S: WallSp Temperature Setpoint (Wall Module, 12..30°C or INV)
S: RmTmp Room temperature
S: EffSp Effective Setpoint
S: HC-Cmd Heat/Cool Command
S: EvapFan Actual state of evaporator fan (0% or 100%)
Lead Compressor
S: LeadC
S: CFan1 Actual state of condenser fan 1 (0..100%)
S: CFan2 Actual state of condenser fan 2 (0..100%)
S: Temp1 Condenser 1 temperature
S: Pres1 Condenser 1 pressure
S: Temp2 Condenser 2 temperature
S: Pres2 Condenser 2 pressure
S: PDownC1 Pump Down Compressor 1
S: Valve1 Actual state valve 1 (HEAT/COOL)
S: Seq1 Sequence 1 (0..100%)
Pump Down Compressor 2
S: PDownC2
S: Valve2 Actual state valve 2 (HEAT/COOL)
S: Seq2 Sequence 2 (0..100%)
S: Seq3 Sequence 3 (0..100%)
S: Dfr1 Defrost 1 active
S: Dfr2 Defrost 2 active
Cause of Sequence 1
C: Seq1
C: Seq2 Cause of Sequence 2
C: Seq3 Cause of Sequence 3
C: EvapFan Cause of Evaporator Fan
C: CFan1 Cause of Condenser 1
Cause of Condenser 2
C: CFan2
C: Valve1 Cause of Valve 1
Cause of Valve 2
C: Valve2
28