General Settings; Honeywell Functions - Honeywell EXCEL5000 OPEN XILON User Manual

Handheld tool

Hide thumbs

Table Of Contents

Table of Contents

Device Setup

Language :English

Keyboard :-

Standby

Auto OFF :

Light

Charge

F1=Help F10=Menu

The commands for the different dialog items shown in Fig. 11 are listed below. If an

item is focused and <ENTER> key is pressed, then either the value will be changed

or a valid value must be entered using the last line as an input line.

"Language"

This command

NOTE: XILON is based upon Sysmik's ALTOhandheld. The ALTOhandheld

"Keyboard"

This command switches

"Standby"

This command

function is switched OFF)

value and XILON is in the battery mode, then the standby mode is activated

automatically.

NOTE: When in the standby mode, only the keypad is watched for an input to

"Auto-OFF"

This command opens the input line. You can then enter values between "0" (=

function is switched OFF) and "20" minutes. If the idle time reaches the entered

value, XILON switches OFF automatically if XILON is in the battery mode.

NOTE: The database will not be changed if XILON is switched OFF automatically.

"Light"

The maximum brightness used for LCD backlighting can be adjusted incrementally

by varying the length of the bar appearing next to "Light" by pressing <ENTER>.

NOTE: If the value is greater than 50%, the power consumption rises much faster

"Charge"

If XILON is powered by an external AC power supply, this command can be used to

switch the battery charger ON and OFF.

NOTE: If the battery charging process is interrupted, it resumes as soon as

NOTE: When connected to an external AC power supply, XILON's internal

min

Fig. 11. Device Set-Up

switches between

currently supports two languages: English and German.

between

"Click ON"

opens the input line. You can then enter values between

and

"20"

wake up

XILON.

Activating any key will then wake up XILON.

The Auto-OFF time starts after the expiration of the time given by the

value for the standby-mode!

than the brightness. However, if the battery voltage drops to below a

critical level, the brightness will diminish considerably. To rectify this

situation, it is recommended that you switch to an external power supply.

XILON is switched ON again.

batteries are automatically recharged, by default.

XILON HANDHELD TOOL - USER GUIDE