Table of Contents
Advertisement
Service Pin (or <F2>)
Search (or <F3>)
OVERVIEW OF HONEYWELL-SPECIFIC FUNCTIONS
The XILON firmware can be divided into three parts: The original ALTOhandheld
software, additional Honeywell-specific functions, and functions designed
specifically for setting-up the parameters of and diagnosing Compact ACU
controllers.
SET
UP
Fig. 2. Overview of XILON functions, including Honeywell-specific functions
Pressing the <ENTER> key while this item has the focus causes XILON to wait for
a service pin message from a node. Alternatively, the <F2> hot key can be
pressed.
Once the "Service Pin" function has been successfully carried out (i.e. XILON has
received a service pin message from a node), the corresponding node is entered
into XILON's database automatically, and such functions as "I/O Functions " and
"All Automatic" can then be utilized, as desired.
Pressing the <ENTER> key while this item has the focus initiates a node search.
The search node function can be used to select a node. XILON can find all of the
nodes of the domains to which it belongs. Additionally, it can also find nodes of all
other domains if these nodes are able to respond to a Query ID message.
Once you have searched for and found a node, it is automatically entered into
XILON's database, and such functions as "I/O Functions " and "All Automatic" can
then be utilized, as desired.
NOTE: Nodes which are not assigned to at least one of the domains to which your
XILON also belongs will not be found.
15
XILON HANDHELD TOOL - USER GUIDE
Power OFF
XILON Setup
H
Honeywell
functions
Service Pin
Search
Edit NID
NID
I/O
I/O Functions
Σ
A
All Automatic
SET
Honeywell
Properties
UP
(°C or °F)
used to select
a module
XL Smart I/O's and
Distributed I/O's:
wiring checks or set
points in manual mode;
Compact ACU's:
set up parameters,
diagnosis
EN2B-0214GE51 R0503
Advertisement
Table of Contents
