All Automatic - Honeywell EXCEL5000 OPEN XILON User Manual

Cause Codes are shown as numbers:
Sequence Causes
0 SEQ_CTRL_NETWORK
5 SEQ_HEAT1_PI
6 SEQ_HEAT2_PI
7 SEQ_COOL1_PI
8 SEQ_COOL2_PI
10 SEQ_HVAC_OFF
14 SEQ_INVALID_APPL
15 SEQ_WAIT_FOR_FAN
20 SEQ_COMP_ALARM
21 SEQ_EXTERN_ALARM
22 SEQ_WAIT_FOR_RS_VALVE
23 SEQ_PUMP_DOWN
24 SEQ_DEFROST
25 SEQ_MIN_ON_TIME
26 SEQ_MIN_OFF_TIME
Fan Causes
0 FAN_HEAT_CONTROL
1 FAN_COOL_CONTROL
2 FAN_CYCLING
3 FAN_CONTINUOUS
6 FAN_HIGHER_DELAY
7 FAN_LOWER_DELAY
8 FAN_SWITCH
9 FAN_ENERGY_OFF
10 FAN_EMERGENCY
11 FAN_WAIT_FEEDB
12 FAN_VALVE_REQUEST
13 FAN_INTERLOCK
14 FAN_SPACE_FROST
15 FAN_FREEZE
16 FAN_OVERRUN
17 FAN_CYCLING
18 FAN_FAN_ONLY
19 FAN_DEFROST
20 FAN_SENSOR_FAILS
21 FAN_PRESS_CONTROL
22 FAN_TEMP_CONTROL
23 FAN_START_LOGIC
24 FAN_COMPR_ALARM
25 FAN_MIN_OFF_TIME
Valve Causes
0 RS_POWER_UP
1 RS_DEFROST
2 RS_OFF_MODE
3 RS_NORMAL
4 RS_COMP_ALARM
5 RS_PRERUN_EXPIRED
6 RS_PRERUN_RUNNING
The "All Automatic" function appears only if at least one entry is present in the
database. It enables you to switch back and forth between the automatic and
manual (reset) modes of Excel Smart I/Os, only. Distributed I/O modules do not
support the automatic/manual mode. In the event that you select a Distributed I/O
module, a changed value is valid only until another device (e.g. an XL500 CPU)
sets a different value.
29
XILON HANDHELD TOOL - USER GUIDE
EN2B-0214GE51 R0503

All Automatic