Table of Contents
Advertisement
Setup Workflow
When the monitor starts up you will have the option of entering the start up wizard. The basic
workflow is as follows.
1.
Initially, the monitor detects communications availability and displays "Detecting Comms"
If no communications are found, the user is prompted to check the modem connection
o
or plug in the GPRS unit (wait at least 20 seconds after powering the unit on for the
modem to initialize). The user is then prompted to try the detection cycle again.
If communications are found then the monitor displays a message indicating that
o
communications have been found for either the cell modem or the phone line and
continues on to retrieve data.
2.
Retrieve "Config Data" begins
If no configuration data is received then the monitor continues on to auto-detect
o
peripherals.
3.
The monitor prompts the user to make a voice setting selection. The monitor then sends the
final configuration to the monitoring application, LifeStream.
If it detects peripherals, then it displays the current voice setting selection. And the
o
monitor then sends the final configuration to the monitoring application.
You can enter Setup Mode anytime the Genesis DM monitor is idle. However, if you are in Setup Mode
during a scheduled report time, the monitor will skip the monitoring session and will not transmit any
information. Your LifeStream application will post a "Transmit Error" (orange alert) for the missed
reading.
To enter Setup Mode manually, quickly press and release START and YES simultaneously. Do not
hold the keys.
Setup Mode normally opens to the Time menu. However, if you press and hold instead of press and
release, you may scroll to a different menu.
Function keys
Once in Setup Mode, you can use the keys on the front panel to enter or exit menus, scroll up or down,
and select menu options. The following table summarizes the functions for each key or key combination.
START + YES
MANUAL
YES
NO
RETEST
P.4510EN.01
GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
Enter/exit Setup Mode
← Back
Exit current menu or menu option
Scroll forward/up through numbers, menu options, or
↑
Scroll backward/down through numbers, menu options,
↓
Enter a menu, accept a displayed value
Enter
12/5/2007
menus
or menus
18
Advertisement
Table of Contents
