Table of Contents
Advertisement
GENESIS DM CLINICAL GUIDE
Programming the Genesis DM Monitor
Programming the Genesis DM Monitor
Operations and Communications
To program the Genesis DM monitor for patient use, you must enter Setup Mode and navigate through
the menus and menu options to customize patient settings. This section provides information about
communication providers, describes the menus, and provides programming instructions.PIN and phone
numbers
Your Clinical Consultant will explain the best transmit mode for your area and give you the required
PIN and phone numbers. When you program a monitor for a patient, you should go through each menu
to verify that the entered numbers match the numbers given to you during your in-service.
Genesis DM Menus
The Genesis DM monitor displays menu names and options in the display face. Because of the limited
space, you can only see one menu or menu option at a time as you scroll through available choices.
Entering Setup Mode opens the Main menu which offers eight menu options: Time Menu, System
Settings, Questions Menu, Password, Transmit Menu, Option Menu, Service Menu, and Exit
Setup. Each menu, with the exceptions of Exit Setup and Password, has sub-menus with additional
options. Some menu options are password protected. If you do not enter your password, you will not
see password-protected sub-menus.
The following table shows the menu layout. Password-protected options are noted with (C).
12/5/2007
15
P.4510EN.01
Advertisement
Table of Contents
