Table of Contents
Advertisement
2.
Plug the prothrombin time meter cable into the data port located on the back of the device.
3.
When the self-check is complete, press
4.
Select SHOW RESULTS and press
5.
Go to PRINT/SEND DATA and press
6.
Go to THIS RESULT and press
If the latest reading collected by the prothrombin time meter was an error reading, the Genesis DM
monitor collects the error reading inserting zeros for values.
A common prothrombin time meter error is Error #81 which occurs when there was an insufficient
amount of blood for accurate testing.
P.4510EN.01
GENESIS DM CLINICAL GUIDE
to go to the Main Menu.
.
.
to transmit.
12/5/2007
Patient Training
66
Advertisement
Table of Contents
