Password - Honeywell GENESIS DM Clinicians Manual

Hide thumbs Also See for GENESIS DM:
Table of Contents

Advertisement

When finished, press MANUAL to return to the Main menu, or press START + YES to exit Setup
Mode.
Sleep Apnea
Sleep Apnea is one block of questions that are either on or off. The default is Off. To turn the prompt
on, enter a collection frequency.
1.
In the Questions menu, scroll to Sleep Apnea, and press RETEST. The first selection blinks. If the
prompt is off, only underscores display.
2.
Press either YES or NO to change the setting, and press RETEST to accept the new setting.
3.
Continue through the seven days until all are set correctly.
When finished, press MANUAL to return to the Main menu, or press START + YES to exit Setup Mode.

Password

Without entering a password, you will not be able to see or enter password-protected menus or menu
options. The password protected menu options are found in the Service and Transmit menus.
All Genesis DM monitors use the same password. If you do not know the password, contact your
supervisor. Follow the steps below to enter the password.
1.
In Setup Mode, scroll to the Password menu.
2.
Press RETEST to enter the menu. The first underscore blinks.
3.
Use either the YES or NO key to scroll to the first number of the password.
4.
Press RETEST to enter the number and move to the next underscore.
Repeat steps 4 and 5 until all four numbers are entered. Once you have pressed RETEST to enter the
fourth number, all menu options become available.
P.4510EN.01
GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
12/5/2007
29

Advertisement

Table of Contents
loading

Table of Contents