Table of Contents
Advertisement
The Date menu allows you to set the correct date. If you need to change the date (MM/DD/YY format
only), follow the steps below.
1.
In the Time Menu, scroll to the Date option and press RETEST to enter the menu. The day
of the week blinks.
2.
Scroll to the correct day of the week. Press RETEST to accept the day. The numeric month
blinks.
3.
Scroll to the correct month. Press RETEST to accept the setting and move to the numeric day.
4.
Scroll to the correct day. Press RETEST to accept the setting and move to the year.
5.
Scroll to the correct year. Press RETEST to accept the setting.
You can scroll to the next Time Menu option –or- press MANUAL to return to the Main menu, or
press START + YES to exit Setup Mode.
Time Format
Options:
a.m./p.m. or 24-hour format
Default:
a.m./p.m.
Access Level:
General
You can set the monitor to display either 24-hour or a.m./p.m. time. To change the format, follow the
steps below.
1.
In the Time Menu, scroll to Time Format, and press RETEST to enter. The currently programmed
format blinks.
2.
Press either YES or NO to change the format, and press RETEST to accept the setting.
You can scroll to the next Time Menu option -or- press MANUAL to return to the Main menu, or
press START + YES until you exit Setup Mode.
Date Format
Options:
MMDDYY or DDMMYY
Default:
MMDDYY
Access Level:
General
The Date Format allows you to set the Genesis DM monitor to a United States format of
month/day/year, or to a European format of day/month/year.
P.4510EN.01
GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
12/5/2007
22
Advertisement
Table of Contents
