Table of Contents
Advertisement
Each report time is followed by this option that allows you to set a report time frequency. The default is
daily. However, you can program any combination of days.
1.
In the Time Menu, scroll to the Report Time # (1-4) Days option that you wish to set (1, 2, 3,
or 4).
2.
Press RETEST to enter. The first setting blinks.
3.
To change the setting, press either YES or NO, and then press MANUAL.
–OR-
1.
Press RETEST to pass the first setting and move to the next setting.
2.
Repeat step three until the days are completely set.
You can scroll to the next Time Menu option -or- press MANUAL to return to the Main menu, or
press START + YES to exit Setup Mode.
Time
Options:
Time in the format set in Time Format menu
Default:
Present time for your time zone
Access Level:
General
The Time menu allows you to set the correct time. If you need to reset the time, follow the steps
below.
1.
In the Time menu, scroll to the Time: option and press RETEST. The hour blinks.
2.
Scroll to the correct hour. Press RETEST to accept the hour setting and move to minutes.
3.
Scroll to the correct minutes. Press RETEST to accept the minute setting.
You can scroll to the next Time Menu option -or- press MANUAL to return to the Main menu, or
press START + YES to exit Setup Mode.
Date
Options:
Day of the week, month, day, and year (displays according to selected date format)
Default:
Today's day and date
Access Level:
General
P.4510EN.01
GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
12/5/2007
21
Advertisement
Table of Contents
