NEC UNIVERGE SV9300 Networking Manual page 87

A
CM72 Assign the destination party's number and
name to each Memory Slot number.
CM52 Assign the Hot Line pairs.
Bidirectional Hot Line should be assigned as
follows:
Hot Line
Pair No.
00
01
NOTE 1:
Up to 100 Hot Line stations (50
pair) can be set.
CM90 Assign the Virtual Line station and RELEASE
keys on the Multiline Terminal.
END
DESCRIPTION
Calling Side Called Side
Station A Station B
Station B Station A
• Y=0
(1) 000-299: Memory Slot No.
(2) XXXX
XXXX: Access Code (Maximum 4 digits)
,
: Separator Mark
YY...Y : Calling Party's No. (Maximum 26
digits)
• Y=1
(1) 000-299: Memory Slot No.
(2) XXX...X: Called Party Name Character
See CM77 in the Command Manual.
• Y=2
(1) 000-299: Memory Slot No.
(2) XXX...X: Called Party Name Character by
• Y=00-99 Hot Line pair No.
(1) 0: Calling Station
1: Called Station
(2) Station No.
E00X
X: 0-7: DESKCON No. assigned by CM10
Y=00
CXX For Called Outside party
XX: Abbreviated Code exclusively for
Hotline-Outside call assigned by
CM71>65
NOTE 2:
• Y=00
(1) My Line No. +
(2) X-XXXXXXXX: Virtual Line station No.
F1020: Release key
1-73
Chapter 1 CCIS FEATURES
BROKERAGE-HOT LINE-CCIS
DATA
,
YY...Y
Code (Maximum 32 digits: 16
characters)
PCPro/CAT (Maximum 16 char-
acters)
Do not assign station number
with first digit "0".
,
+ Key No.
NWA-088654-001 Rev.1.0
94ch1003.fm