NEC UNIVERGE SV9300 Networking Manual page 145

A
CMA7 Assign Originating Office number for Closed
Numbering Plan.
See Example 3: Data Assignment of CMA7
Page 1-136
Y=06.
Assign the Center Billing Office number for
Closed Numbering Plan, if required.
CM08 Specify whether the calling party information
(Trunk Route No./Station No.) is sent to
SMDR on CCIS tandem calls.
See Example 1: Data Assignment of SMDR
Call Record on a Tandem Call through CCIS.
Page 1-133
CM65 Specify the station number sent to the 2400
IPX through CCIS for SMDR.
NOTE 1: If the Center Office is the 2400 IPX,
CM65 Y=26 is required.
NOTE 2: When setting Name Display to Sub
Line, whether to display My Line
No./Name or Sub Line No./Name
depends on CM08>502. Set this
data to the same setting of CM08>
502.
(ex.) When CM65 Y=26 is set to "0"
(My Line No./Name), set CM08>
502 to "0" (Name of My Line).
CM13 Provide the SMDR service for outgoing calls
to the required station.
CM35 Provide SMDR service for outgoing calls to
the required trunk route.
B
DESCRIPTION
• Y=06
(1) 00-63: CCIS channel No.
(2) 0-9999: Originating Office No.
• Y=07
(1) 00-63: CCIS channel No.
(2) 0-9999: Center Billing Office No.
(1) 377
(2) 0 : Station No. and Office No.
1 : Trunk Route No.
• Y=26
(1) Tenant No. of Stations
(2) 0 : My Line No./Name
1 : Sub Line No./Name
• Y=06
(1) X-XXXXXXXX: Station No.
(2) 1 : To provide
• Y=014
(1) 00-63: Trunk Route No.
(2) 1 : To provide
1-131
Chapter 1 CCIS FEATURES
CENTRALIZED BILLING-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1004.fm