NEC UNIVERGE SV9300 Networking Manual page 115

CALL FORWARDING-NO ANSWER-CCIS / MULTIPLE CALL FORWARDING-NO ANSWER-CCIS
B
CM65 Provide Call Forwarding feature with each ten-
ant as per incoming call type.
CM41 Specify the timing for Call Forwarding-No
Answer for a trunk incoming call.
Specify the timing for Call Forwarding-No
Answer for an internal call or an assisted call.
CM90 Assign the Call Forwarding-No Answer key to
a Multiline Terminal, if desired.
END
DESCRIPTION
• Y=23
Internal Call or ATT assisted call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 1 : Call Forwarding-No Answer
• Y=0
(1) 01
(2) 01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36 sec-
onds.
• Y=0
(1) 15
(2) 01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36 sec-
onds.
• Y=00
(1) My Line No. +
(2) F0016: Call Forwarding-No Answer Set/
Cancel
For setting the same key as Call Forwarding-
Busy Line:
(1) My Line No. +
(2) F0012: Call Forwarding-No Answer/Busy
Line Set/Cancel
1-101
Chapter 1 CCIS FEATURES
DATA
,
+ Key No.
,
+ Key No.
NWA-088654-001 Rev.1.0
94ch1003.fm