NEC UNIVERGE SV9300 Networking Manual page 298

CONNECTED DESTINATION INDICATION / CALLING PARTY INFORMATION INDICATION ASSIGNMENT
(2) To indicate the user's name of answering station/terminated station/busy line station to the calling
party or to indicate the calling party name to the called party, do the following programming. If you
do not need any indications, restrict them by CM15 Y=152.
START
CM12 Assign Service Restriction Class A and Ser-
vice Restriction Class B to the required sta-
tions.
CM15 Allow or Restrict Connected Destination
Name Indication/Calling Party Name Indica-
tion in Service Restriction Class B assigned by
CM12 Y=02.
Allow Calling Name Display for incoming
calls in Service Restriction Class A assigned
by CM12 Y=02.
CM08 Provide the system with the Calling Name Dis-
play feature for CCIS calls.
CM35 Specify the Object ID of Q-SIG Facility Infor-
mation Element.
CMA7 Provide each CCH number with Name Display
feature.
A
DESCRIPTION
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
ZZ : 00-15 : Service Restriction Class B
• Y=152
(1) 00-15: Service Restriction Class B
assigned by CM12 Y=02
(2) 0 : Restricted
1 : Allow
• Y=136
(1) 00-15: Service Restriction Class A
assigned by CM12 Y=02
(2) 1 : Calling Name Display
(1) 379: Calling Name Display for CCIS calls
(2) 1 : To provide
• Y=197
(1) 00-63: B channel Trunk Route No.
(2) 0 : Global
1 : Local
• Y=26 Name Display
(1) 00-63: CCH No.
(2) 1 : To provide
2-22
Chapter 2 Q-SIG FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch2001.fm