NEC UNIVERGE SV9300 Networking Manual page 286

• The LCD does not indicate the station number/user's name if the number/name is not sent from the
opposite office.
• The following station number indications are available.
- Indication of a calling station number to a called station.
- Indication of an answering station number to a calling station.
• The following user's name indications are available.
- Indication of a calling station user's name to a called station.
- Indication of an answering station user's name to a calling station.
- Indication of a terminated station user's name to a calling station.
- Indication of a user's name whose line is busy to a calling station.
• The system can send/receive maximum of 16-digit station number/user's name.
If the received station number/user's name exceeds 16 digits, from the 1st digit to the 16th digit are
sent to stations and the 17th digit and later are deleted.
• The system cannot receive the station number/user's name sent from an ISDN telephone.
• If the station is an ISDN telephone or a terminal which has no indicator, the station number/user's
name cannot be indicated.
• There are following conditions for Attendant Console in this feature.
- If the station number exceeds 6 digits, the last 6 digits are indicated on the LCD.
- Attendant Console number cannot be sent.
- Attendant Console user's name cannot be sent/received.
• It can be specified to each station (Single line Telephone/Multiline Terminal) whether a station num-
ber/user's name is sent or not, by system data programming.
• When offices are connected with tandem, the transit of user's name is available in the tandem office
under the following conditions.
CALLING
OFFICE
USER'S
NAME: KEN
- A calling office and tandem office are connected by Q-SIG, and tandem office and destination office
are connected by Q-SIG, in this case, maximum of 50-digit user's name transit is available.
- A calling office and tandem office are connected by Q-SIG, and tandem office and destination office
are connected by No. 7 CCIS, in this case, maximum of 16-digit user's name transit is available.
- The user's name transit is available under the tandem connection above-mentioned only.
TANDEM
OFFICE
CONNECTED BY
Q-SIG
2-10
Chapter 2 Q-SIG FEATURES
DESTINATON
OFFICE
CONNECTED BY
Q-SIG/NO. 7 CCIS
SERVICES
NWA-088654-001 Rev.1.0
94ch2001.fm