NEC UNIVERGE SV9300 Networking Manual page 291

C
CM35 Provide the cyclic redundancy checking for the
D channel trunk route.
NOTE:
When the opposite office does not
provide the cyclic redundancy
checking (CRC) function, set the
second data "1".
Provide the B channel trunk routes and the D
channel trunk route with No. 7 CCIS facilities.
Assign the CCH number to the B channel trunk
routes and the D channel trunk route.
Assign the D channel number to the B channel
trunk routes.
Assign the LAPD mode of the D channel trunk
route.
This data setting must not be identical with the
opposite PBX.
If the opposite PBX is defined as a "Network
Mode", set this data to 1 (User Mode).
Provide the B channel trunk routes as the trunk
routes for Q-SIG.
Provide the B channel trunk routes with calling
party number (1-8 digits) transfer to ISDN on
tandem call from Q-SIG.
D
DESCRIPTION
• Y=089
(1) 00-63: D channel Trunk Route No.
(2) 0 : To provide
1 : Not provided
• Y=090
(1) 00-63: B channel Trunk Route No.
(2) 0: No. 7 CCIS
• Y=090
(1) 00-63: D channel Trunk Route No.
(2) 0: No. 7 CCIS
• Y=091
(1) 00-63: B channel Trunk Route No.
(2) 00-63: CCH No.
• Y=091
(1) 00-63: D channel Trunk Route No.
(2) 00-63: CCH No.
• Y=093
(1) 00-63: B channel Trunk Route No.
(2) 00-31: D channel No.
• Y=113
(1) 00-63: D channel Trunk Route No.
(2) 0 : Network Mode
1 : User Mode
• Y=196
(1) 00-63: B channel Trunk Route No.
(2) 00: For Q-SIG
• Y=245
(1) 00-63: B channel Trunk Route No.
(2) 0 : To provide
2-15
Chapter 2 Q-SIG FEATURES
PRT ASSIGNMENT
DATA
BLADE RESET
NWA-088654-001 Rev.1.0
94ch2001.fm