NEC UNIVERGE SV9300 Networking Manual page 328

When an IP Station user and IP Station move to a visitor unit, and then return to the home unit
without doing the logout operation
1. Without doing the logout operation, move to the home unit.
After 1-2 minutes from IP Station power off or cable disconnection, you are logged out.
2. Manually change the primary DRS address, IP address, subnet mask, and default gateway ad-
dress with the IP Station, or automatically set them with the DHCP server.
3. Do the login operation (enter station number, password).
You can log into the home unit.
When only an IP Station user moves to a visitor unit, and then returns to the home unit without
doing the logout operation
1. Without doing the logout operation, move to the home unit.
2. Do the login operation (enter station number, password) with your own IP Station at the home
unit.
"Override?" is displayed on the LCD of the IP Station.
3. Press the Yes key.
The IP Station at the visitor unit is logged out.
You can log into the home unit.
NOTE 1: For the primary address, set the IP address of CPU blade of the destination unit.
NOTE 2: At the destination unit, the second data of CM08>516 must be set to 0.
Chapter 3 REMOTE UNIT OVER IP FEATURES
NOTE 2
3-16
SYSTEM CONDITIONS
NOTE 1
NWA-088654-001 Rev.1.0
94ch3001.fm