NEC UNIVERGE SV9300 Networking Manual page 142

Hide thumbs Also See for UNIVERGE SV9300:
Table of Contents

Advertisement

A
CM0B
Assign the Subnet Mask for the system.
NOTE:
The second data must be entered
including the periods (.).
Assign the Default Gateway Address for the
system.
NOTE 1:
The second data must be entered
including the periods (.).
NOTE 2:
There are the following conditions
when setting the Default Gateway
Address by this command.
• Only one Default Gateway
Address can be set for the system.
• Set the Default Gateway Address
to the Maintenance port (Y=0XX)
when not using VoIPDB.
• Set the Default Gateway Address
to the VOIP port (Y=1XX) when
using VoIPDB.
Select the Port for SMDR.
CM08
Provide the system with Centralized Billing-
CCIS for Center Office.
Not provide the system with Centralized Bill-
ing-CCIS for Local Office.
B
DESCRIPTION
RESET
RESET
Y=0XX (Maintenance Port [0] + Unit No.
1XX (VOIP Port [1] + Unit No. [01-50])
(1)
01
(2)
XXX.XXX.XXX.XXX:
255.0.0.0-255.255.255.252:
Subnet Mask for the system (Maximum 15
digits)
Y=0XX (Maintenance Port [0] + Unit No.
1XX (VOIP Port [1] + Unit No. [01-50])
(1)
02
(2)
XXX.XXX.XXX.XXX:
0.0.0.1-255.255.255.254:
Default Gateway Address for the system
(Maximum 15 digits)
Y=001
(1)
92
(2)
0: Maintenance port
1: VOIP port
(1)
368
(2)
0: To provide
(1)
378
(2)
1 : Not provided
1-128
Chapter 1 CCIS FEATURES
CENTRALIZED BILLING-CCIS
DATA
[01-50])
[01-50])
NWA-088654-001 Rev.1.0
94ch1004.fm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents