NEC UNIVERGE SV9300 Networking Manual page 273

Operating Procedure
To record and stop one's own conversation into the VMS:
1. Push the function key assigned by CM90 Y=00: F5026 during conversation. If your station con-
nects to the VMS, then start recording. If not, the recording function is not available.
2. To stop recording, push the function key assigned by CM90 Y=00: F5026 (CM08>578: 0 is set),
CM90 Y=00: F5027 (CM08>578: 1 is set) or release the line, and the recording automatically stops.
3. After you stop recording, Multiline Terminal returns to the normal status.
NOTE 1: While recording, the operations such as hooking/holding is not available at both sides.
NOTE 2: Though the opposite side releases the line, the recording continues as long as the recording side
doesn't stop recording.
To play a record from the VMS:
There are two ways to play it.
One way is the same as VOICE MAIL INTEGRATION-CCIS. See that of Operating Procedure.
Page 1-254
The other way is as follows.
1. Lift the handset and receive dial tone.
2. Push the function key assigned by CM90 Y=00, then you can hear the record from the VMS.
To clear a record from the VMS:
To forward a record to another station in the VMS:
1. Lift the handset and receive dial tone.
2. Dial the voice station number and receive ringback tone.
The LCD shows:
[ xxx]
VMS: Voice mail station number
3. Follow the instructions given by the VMS.
1-259
Chapter 1 CCIS FEATURES
VOICE MAIL LIVE RECORD-CCIS
NWA-088654-001 Rev.1.0
94ch1006.fm