NEC UNIVERGE SV9300 Networking Manual page 100

A
CM08 Allow Call Forwarding-Outside-CCIS.
Specify the Call Forwarding-All Calls-Out-
side setting operation.
Specify displaying the first forwarding station
number via CCIS or the second forwarding sta-
tion number of own office on LCD of forward-
ing destination Multiline Terminal.
Assign whether an extension can set the desti-
nation of Call Forwarding-All Calls-Outside
by entering only a trunk access code.
CMA7 Allow or restrict Multiple Call Forwarding-All
Calls/Busy Line/No Answer-CCIS for each
CCH number.
CM42 Specify the number of times of Multiple Call
Forwarding-All Calls/Busy Line/No Answer-
CCIS.
CM65 Provide Call Forwarding feature with each ten-
ant as per incoming call type.
B
CALL FORWARDING-ALL CALLS-CCIS / MULTIPLE CALL FORWARDING-ALL CALLS-CCIS
DESCRIPTION
(1) 370
(2) 1 : Allowed
(1) 222
(2) 0 : Setting when the station goes on-
hook/when receiving Service Set Tone
(PBR time out)
1 : Setting when receiving Service Set
Tone (PBR time out)
(1) 564
(2) 0 : The first forwarding number via CCIS
1 : The second forwarding number of
own office
(1) 386
(2) 0 : Restricted
1 : Allowed
• Y=29
(1) 00-63: CCH No.
(2) 0 : Allowed (Maximum 7 times)
1 : Restricted (Only once)
(1) 72
(2) 01-07: 1 time-7 times
If no data is set, the default setting is 5
times.
• Y=23
Internal Call or ATT assisted Call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 1 : Call Forwarding-All Calls
1-86
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm