NEC UNIVERGE SV9300 Networking Manual page 348

A
CM20 Assign the access code for LCR Group 0-3.
CM8A Assign an Area Code Development Pattern
number to each LCR Group.
Assign a Route Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000.
Assign a Tenant number and a Route Pattern
number to the Tenant Pattern number assigned
by CM8A Y=4000-4007.
NOTE: Set the tenant number assigned by
CM0B Y=1XX>11 or CM12 Y=04
to the first data.
Assign the route pattern table with the desired
properties and selection of appropriate routes.
END
DESCRIPTION
Chapter 3 REMOTE UNIT OVER IP FEATURES
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
• Y=A000
(1) 0-3: LCR Group 0-3
(2) 4000-4007: Area Code Development Pat-
• Y=4000-4007 Area Code Development
(1) X-X...X: Area Code (Maximum 8 digits)
(2) 1000-1015: Tenant Pattern No. 00-15
• Y=1000-1015 Tenant Pattern No. 00-15
(1) 00-63: Tenant No. 00-63
(2) 0000-0255: Route Pattern No. 000-255
• Y=0000-0255 Route Pattern No. 000-255
(1) 1-4: Order of LCR Selection
1 : 1st
2 : 2nd
3 : 3rd
4 : 4th
(2) XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
3-36
USER MOBILITY ASSIGNMENT
DATA
tern No. 0-7
Pattern No. 0-4
NWA-088654-001 Rev.1.0
94ch3001.fm