NEC UNIVERGE SV9300 Networking Manual page 297

CONNECTED DESTINATION INDICATION / CALLING PARTY INFORMATION INDICATION ASSIGNMENT
B
CM8A Assign an Area Code Development Pattern
number to each LCR Group.
Assign a Route Pattern number to the digits to
be dialed in the Area Code Development Pat-
tern number assigned by CM8A Y=A000.
Specify the LCR selection priority for the
Route Pattern number assigned by CM8A
Y=4005-4007.
Add the Calling Party Number for ISDN calls
via CCIS/Q-SIG route.
CM08 Provide the system with the Calling Name
Display feature for CCIS calls.
CMA7 Provide each CCH number with Name Display
feature.
Provide Calling Party Information transfer
service.
END
DESCRIPTION
• Y=A000
(1) 0-3: LCR Group 0-3
(2) 4005-4007: Area Code Development pat-
• Y=4005-4007 Area Code Development
(1) X-X...X: Area Code 1-8 digits
(2) 0000-0255: Route Pattern No. 000-255
• Y=0000-0255
Route Pattern No. 000-255
(1) 1: 1st priority
2: 2nd priority
3: 3rd priority
4: 4th priority
(2) XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
• Y=5000-5255
LCR Pattern No. 000-255
(1) 165: Caller ID of outgoing call by CCIS/
Q-SIG
(2) 0: To add
(1) 379: Calling Name Display for CCIS calls
(2) 1 : To provide
• Y=26 Name Display
(1) 00-63: CCH No.
(2) 1 : To provide
• Y=28 Calling Party Information transfer
service
(1) 00-63: CCH No.
(2) 1 : To provide
2-21
Chapter 2 Q-SIG FEATURES
DATA
tern No. 5-7
Pattern No. 5-7
NWA-088654-001 Rev.1.0
94ch2001.fm