NEC UNIVERGE SV9300 Networking Manual page 252

A
CM13 For the station connected to PGD(2)-U10
ADP, set the Message Waiting/Stored Call
Record lamps not to be lit.
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
answering a station call.
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
handling an unanswered station call.
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
answering a trunk call.
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
handling an unanswered trunk call.
Allow the accommodation of PGD(2)-U10
ADP.
NOTE 1: Set this data only for a Base Port of DLC blade.
NOTE 2: Whether the following equipment can be accommodated to the same DLC blade or not de-
pends on this data.
- When the second data is set to "0"
Accommodatable
Unaccommodatable: DESKCON/DSS Console
- When the second data is set to "1"
Accommodatable
Unaccommodatable: PGD(2)-U10 ADP
NOTE 3: When the second data is set to 0, and accommodating DT300/DT400 Series DESI-less to
the same DLC blade to which PGD(2)-U10 ADP is accommodated, the Line Key of the
DT300/DT400 Series DESI-less does not light up (however, Character Display or Icon
Display on the DESI-less screen is provided).
B
DESCRIPTION
BLADE RESET
: DT300/DT400/D
: DT300/DT400/D
TRUNK ANSWER FROM ANY STATION-CCIS
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 1: Not provided
• Y=41
(1) X-XXXXXXXX: Station No.
(2) 1: Not stored
• Y=49
(1) X-XXXXXXXX: Station No.
(2) 1: Not stored
• Y=60
(1) X-XXXXXXXX: Station No.
(2) 1: Not stored
• Y=61
(1) X-XXXXXXXX: Station No.
(2) 1: Not stored
• Y=63
(1) X-XXXXXXXX: Station No.
(2) 0 : To accommodate
1 : Not accommodated
term
85/PGD(2)-U10 ADP
term
85/DESKCON/DSS Console
1-238
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1006.fm