Cisco Sce8000 Gbe Topology And Topology-Related Parameters; Introduction; The Cisco Sce8000 Gbe Platform - Cisco SCE8000 GBE Installation And Configuration Manual

Cisco SCE8000 GBE Topology and
Topology-Related Parameters
Revised: December 04, 2012, OL-19897-02

Introduction

This chapter describes the possible deployment topologies of the Cisco SCE8000 GBE and explains how
to configure the relevant parameters correctly for each topology.
•
•
•
•
•
•

The Cisco SCE8000 GBE Platform

The Cisco SCE8000 GBE is a solution for multi Gigabit Ethernet links with load sharing and
asymmetrical routing and support for fail-over between two SCE platforms.
The Cisco SCE8000 GBE is built to support wire speed processing of full-duplex Gigabit Ethernet
streams. The Cisco SCE8000 GBE can, therefore, be deployed in a multi-link environment, in several
different topologies.
•
•
OL-19897-02
The Cisco SCE8000 GBE Platform, page 3-1
Topology Considerations, page 3-2
Physical Topologies, page 3-3
Link Continuity, page 3-7
Topology-Related Parameters, page 3-10
Asymmetric Routing Topology, page 3-13
Single Cisco SCE8000 GBE topology — Provides the ability to process both directions of a
bi-directional flow, processing both the upstream and downstream paths of a flow, even if they
traverse different links.
Dual Cisco SCE8000 GBE topology (cascade) — Cascaded Cisco SCE8000 GBE s provide
high-availability and fail-over solution and maintain the line and service in case of Cisco SCE8000
GBE failure
C H A P T E R
Cisco SCE8000 GBE Installation and Configuration Guide
3
3-1