Introduction - Cisco SCE8000 GBE Installation And Configuration Manual

Removal and Replacement Procedures
Revised: August 23, 2010, OL-19897-02

Introduction

This chapter describes how to perform removal and replacement procedures for Cisco SCE8000 GBE
platform field-replaceable units (FRUs).
Before you install, operate, or service the system, read the
Warning
Information for the Cisco SCE8000 GBE
know before working with the system.
•
•
•
•
•
•
•
•
OL-19897-02
Safety, page 9-2
Preventing Electrostatic Discharge Damage, page 9-2
Supported Hardware, page 9-3
Removing and Replacing the Power Supply, page 9-4
Removing and Replacing the Fan Assembly, page 9-12
Removing and Replacing Modules, page 9-13
Removing and Replacing Shared Port Adapters, page 9-23
Removing and Replacing the Optical Bypass Module, page 9-27
C H A P T E R
Regulatory Compliance and Safety
. This guide contains important safety information you should
Cisco SCE8000 GBE Installation and Configuration Guide
9
9-1