Organization - Cisco SCE8000 GBE Installation And Configuration Manual

About this Guide

Organization

The major sections of this guide are as follows:
Table 2
Chapter Title
1
2
3
4
5
6
7
8
9
A
OL-19897-02
Document Organization
Cisco Service Control Overview, page 1-1
Introduction to the Cisco SCE8000 GBE
Platform, page 2-1
Cisco SCE8000 GBE Topology and
Topology-Related Parameters, page 3-1
Installing the Cisco SCE8000 GBE Chassis,
page 4-1
Connecting the Management Interfaces,
page 5-1
Cabling the GBE Line Ports and Completing
the Installation, page 6-1
Basic Cisco SCE8000 GBE Platform
Operations, page 7-1
Troubleshooting, page 8-1
Removal and Replacement Procedures,
page 9-1
CLI Commands to Verify a Successful
Installation, page A-1
Description
This chapter provides a brief introduction to
Cisco Service Control.
This chapter provides a hardware overview of
the SCE8000 GBE platform.
This chapter describes the possible
deployment topologies of the SCE8000 GBE
and explains how various aspects of the
topology determine the configuration of the
system.
This chapter explains how to install a
SCE8000 GBE platform in the rack and
properly ground it.
This chapter explains how to connect the
SCE8000 GBE platform to a local console
and perform the initial system configuration
via the setup wizard that runs automatically.
This chapter provides instructions for cabling
the Gigabit Ethernet ports for both one and
two SCE8000 GBE topologies, and for
configuring Gigabit Ethernet (GBE) interface
parameters. In a topology utilizing two
SCE8000 GBE s (cascade), this includes the
cascade ports as well as the line ports.
This chapter describes how to start up the
SCE8000 GBE platform, reboot, and
shutdown. It also describes how to manage
configurations.
This chapter provides basic system startup
troubleshooting information.
This chapter explains the procedures for
removing and replacing the power supplies,
fan trays, and other modules.
This appendix provides a basic
post-installation checklist to verify that the
installation was successful.
Cisco SCE8000 GBE Installation and Configuration Guide
xiii