Chapter 4 Installing The Cisco Sce8000 Gbe Chassis; Introduction - Cisco SCE8000 GBE Installation And Configuration Manual

Installing the Cisco SCE8000 GBE Chassis
Revised: August 23, 2010, OL-19897-02

Introduction

This chapter describes how to install a Cisco SCE8000 GBE chassis.
Warning Before you install, operate, or service the system, read the
Information for the Cisco SCE8000 GBE
should know before working with the system.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
Warning
disconnect the power at the circuit breaker on DC units.
The plug-socket combination must be accessible at all times because it serves as the main
Warning
disconnecting device.
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Warning There is the danger of explosion if the battery is replaced incorrectly. The battery is not a
user-serviceable part.
Warning Class 1 laser product.
OL-19897-02
C H A P T E R
Regulatory Compliance and Safety
Platform. This guide contains important safety information you
Cisco SCE8000 GBE Installation and Configuration Guide
4
4-1